Showing posts with label IOS Products. Show all posts
Showing posts with label IOS Products. Show all posts

The ET100 Refit

The ET100 Refit (sometimes also referred to as a 'Retrofit' or an 'Active Former'  attaches to the edger where the frame pattern is normally used and transforms the pattern based edger into an automatic, computer-controlled patternless edger. This refit results in that trusted and reliable Weco edger of yours to continue to do its job edging lenses by now with the ability to work with a digital tracer that eliminate the need to make patterns for the edger.

Features:

• Digital computer control

• One hour installation includes calibration time for axis and size.

• No permanent modifications allows quick and easy conversion back to a manual system if required.

• Simple axis and size calibration is done from the front panel on the LED display.

• Precise corners, precise first time cut.

• Available for the following edger models:

    - Weco 440, 2440, 12SC, 480, 486
    - Weco 1061, 1067, 461, 460

IOS's Affordable ET300 Eyeglass Frame Tracer


ET300 Eyeglass Digital Frame Tracer The ET300 is a solid, compact, extremely accurate yet affordable tracer designed to meet the needs of today.




Features:


• 1000 job storage.

• Traces over 2400 points, with 0.01mm accuracy.

• Many adjustable features including rotation speed, stylus pressure,
and automatic stylus insert into the frame.

• Shapes can be stored box centred or decentred (with input of PD's).

• Realtime Variable Stylus Pressure (RVSP). This is a patented system
that adjusts the amount of stylus pressure exerted on a frame while it is
being traced.

• At approximately 8" x 10" x 5", it does not take up much space.

• Extremely user friendly. Simple to learn and operate.

• Output data to most 3rd party lab or remote software packages.

• Multiple edgers with active formers may be used with one tracer.

The IOS E950 Patternless 3D Edger







The IOS E950 Patternless Edger. Its fast, accurate, economical and smart.






  • Full 3D with automatic base curve measurement
  • Bevel and Rimless operation
  • Reliable Direct Drive Motor
  • Lens Compartment Rinsing cycle
  • Heavy Duty Construction
  • Electric easy-to-adjust chucking
  • Is provided with complete waterworks kit
  • Water rinsing at user control
  • Has Re-edging capacity
  • Polishing feature available
  • Trivex Lens Cutting Option
  • Size (22.5" x 13" x 14.5")
  • Weight is 65lbs or 30kg
  • Cuts all materials (including glass):
  1. Plastic Lens
  2. Polycarbornate Lens
  3. Trivex (c)  Lens
The IOS E950 integrates with the IOS line of 3D Tracers including the ET300 Single-Eye 3D Tracer or the ET400 Dual-Eye 3D Tracer.  That means the E950 a true 3D Patternless Edger that reliably cuts even the toughest materials including today new TRIVEX lens!


The E950 is built to last. It can operate in difficult environments. It is easy to use and easy to learn to use.

The IOS ET400 Dual Eye 3D Tracer



The IOS ET400 Dual Eye Tracer is a small, compact, ditigal eye frame tracer that is compable of fully automatic 3D tracing. Forget the days of making patterns. Forget the days of tracing one side of the frame and then force the other side to be its identical twin. The ET400 features auto-stylus insertion and provide traces with zero frame distortion by the optician. There are no attachments needed rimless tracing. Simply put the ET400 is simple to use and works with fast built-in auto calibration. It is user friendly. Its measurements are based on 2,400 data points for greater accuracy. It measures DBL for you. Even better is the fact that the software works with essentially of piece of lab software that is in the marketplace. It is available in both 120v and 220v.